Buy Low Price From Here Now
This Makita tool combo includes a powerful 1/2in. driver drill, impact driver and xenon flashlights, with powerful 18V lithium-ion batteries to keep you on the job. Tools Included: 1 Drill Driver, 1 Flashlight, and 1 Impact Driver, Storage Case Included: Yes, Volts: 18, Battery Type: Lithium-ion, Battery Included: Yes (2), Charger Included: Yes
Readmore
Technical Details
- 2-speed 1/2-Inch Driver-Drill (0-400/0-1, 500 RPM) with Makita-built 4-pole motor delivers 450 in.lbs. of Max Torque and weighs only 3.5 lbs- Variable speed Impact Driver (0-2, 300 RPM) provides 1, 280 in.lbs. of Max Torque in a compact design and weighs only 2.8 lbs
- 4-Position Flashlight with Xenon bulb runs over 2 hours per charge
- Makita Compact Lithium-Ion battery and Energy Star rated 15-Minute Rapid Optimum Charger produces 430% total lifetime work with 2.5X more cycles
- 3-year warranty on tools and 1-year warranty on batteries and charger
See more technical details
By Frank Breech (Freehold, New Jersey, USA)
I have owned this set, driller, driver and flashlight for two years. I have owned several cordless drills in the past, but this one is by far the best. First, the battery maintains its charge better than any other I have encountered. The tool doesn't weaken until the battery is virtually fully discharged. The battery charges rapidly; less than 30 minutes. Second, the tools are extremely well balanced, better than any drill or driver I have used. Third, they are very powerful, always able to drill or driver whatever I throw at them. In the 2+ years they have been durable. Fourth, they are smooth running and ergonomically designed. Nice touches like the LED light on the drill make drill in tight, poorly lighted places easier. The keyless chuck on the drill grips very well and doesn't loosen. The flash light is a worth while addition. It lasts long, lights very well and with an adjustable angle makes working under sinks and in other dark places easier. After two years of ownership, I enthusiastically recommend these tools.
By Russell A. Rohde MD (West Covina, California USA)
After 10 + years of trusted service from my 1ST MAKITA cordless Nickel-Cadmium rechargeable ML902 flashlight and 2 drills, the batteries became "tired", recharged poorly and had little power. I fortunately blessed myself with the 3 piece MAKITA 18-Volt,. Lithium-Ion Combo kit - Wow! Now, a full recharge time is 30 minutes, the power is superb - and by using the Impact Driver even the largest of wood screws is effortless, but I still soap them per my Father, Ralph). Though the handle design differs, it is now even better by being standing upright; and the belt clip is clever. The only change I'd make is to have the chuck accept a key to tighten larger drills bits. The price for the new 3 piece Combo Kit was almost unbelievable - and shipping within the week allowed Jennifer and I to install the High Tech Power Pet electronic cat door for the 4 cats (Tiger, Sebastian, Creamer, & Missy) the next day to keep out raccoons (Procyon lotor). This will be my favored Christmas present. Thomas Edison would be proud of Makita Cordless.
By JT
I am sending back today. I like the drill but the batteries last half as long as my 12 volt milwaukee drill with the same amp hour rating. I called Makita customer service and they were not interested in helping me. They told me to send it back or try and find a local authorized service center.
By cvl (Bay Area, CA United States)
Couple important points:
#1 - The drill and the driver both now come with the belt clips found on the more expensive line, that was a nice surprise.
#2 - The light does not have the ability to mount a belt clip to it. This is by no means a deal breaker but would be a very handy option for a few situations.
Not much else to add to all the other glowing reviews. I borrowed the impact driver on a job, fell in love and decided to get the set.
By Pal Val
I have used cordless drills/ drivers since day one and this latest generation Makita is great in a lot of ways.The best part is the comfort factor...it is well designed and lightweight. The hammer driver works amazingly well for the size. I just finished putting 100 3-3/4'' Tapcons in cement, and though I used my electric hammer drill to drill the holes, ( this Makita is not a hammer drill ) I used the little cordless Makita hammer driver to drive the tapcons in. It worked just fine.
Downside is that the battery time is relatively short and the battery really needs to be kept well charged to work - meaning as soon as you start to lose power, you need to swap the battery. Though the recharge is quick, it is inconvenient swapping batteries every 20- 30 minutes if you are giving it constant or prolonged use.
For me, the positives...comfort, hammer driver and good power capability outweigh the so- so battery life. I have heard there is a battery available with longer life and I will definitely be looking into that.
UPDATED edit by me...This kit comes with two 18V 1.8AH batteries. Like I said they work great but wear down quick if under constant use. If you need better run time the search terms for the EXTRA 3.0 AH batteries you need to buy is below ...at the time I am editing this they are $130 a pair, so bear that in mind. They are also a bit larger, thus heavier. If you need the extra power I'd see if this kit is offered with the 3.0 batteries at the outset.
Makita BL 1830-2 18 Volt 3.0 AH Battery 2-Pack
Images Product
Buy Makita LCT300W 18-Volt Compact Lithium-Ion Cordless 3-Piece Combo Kit Now
0 comments:
Post a Comment